ModifyVpnAttachmentAttributeRequest.Builder (alibabacloud-vpc20160428 5.0.25 API)

java.lang.Object
- com.aliyun.sdk.service.vpc20160428.models.ModifyVpnAttachmentAttributeRequest.Builder

所有已实现的接口:

darabonba.core.RequestModel.Builder<ModifyVpnAttachmentAttributeRequest,ModifyVpnAttachmentAttributeRequest.Builder>

封闭类:

ModifyVpnAttachmentAttributeRequest
```
public static final class ModifyVpnAttachmentAttributeRequest.Builder
extends Object
```

方法概要

所有方法实例方法具体方法
限定符和类型	方法和说明
`ModifyVpnAttachmentAttributeRequest.Builder`	`autoConfigRoute(Boolean autoConfigRoute)` Specifies whether to automatically configure routes.
`ModifyVpnAttachmentAttributeRequest.Builder`	`bgpConfig(String bgpConfig)` The Border Gateway Protocol (BGP) configuration: * BgpConfig.EnableBgp: specifies whether to enable BGP.
`ModifyVpnAttachmentAttributeRequest`	`build()`
`ModifyVpnAttachmentAttributeRequest.Builder`	`clientToken(String clientToken)` The client token that is used to ensure the idempotence of the request.
`ModifyVpnAttachmentAttributeRequest.Builder`	`customerGatewayId(String customerGatewayId)` The customer gateway associated with the IPsec-VPN connection.
`ModifyVpnAttachmentAttributeRequest.Builder`	`effectImmediately(Boolean effectImmediately)` Specifies whether to immediately start IPsec negotiations after the configuration takes effect.
`ModifyVpnAttachmentAttributeRequest.Builder`	`enableDpd(Boolean enableDpd)` Specifies whether to enable the dead peer detection (DPD) feature.
`ModifyVpnAttachmentAttributeRequest.Builder`	`enableNatTraversal(Boolean enableNatTraversal)` Specifies whether to enable NAT traversal.
`ModifyVpnAttachmentAttributeRequest.Builder`	`healthCheckConfig(String healthCheckConfig)` The health check configurations: * HealthCheckConfig.enable: specifies whether to enable the health check feature.
`ModifyVpnAttachmentAttributeRequest.Builder`	`ikeConfig(String ikeConfig)` The configuration of Phase 1 negotiations: * IkeConfig.Psk: The pre-shared key that is used for authentication between the VPN gateway and the data center
`ModifyVpnAttachmentAttributeRequest.Builder`	`ipsecConfig(String ipsecConfig)` The configuration of Phase 2 negotiations: * IpsecConfig.IpsecEncAlg: the encryption algorithm that is used in Phase 2 negotiations.
`ModifyVpnAttachmentAttributeRequest.Builder`	`localSubnet(String localSubnet)` The CIDR block of the virtual private cloud (VPC) that communicates with the data center.
`ModifyVpnAttachmentAttributeRequest.Builder`	`name(String name)` The name of the IPsec-VPN connection.
`ModifyVpnAttachmentAttributeRequest.Builder`	`networkType(String networkType)` The network type of the IPsec-VPN connection.
`ModifyVpnAttachmentAttributeRequest.Builder`	`ownerAccount(String ownerAccount)` OwnerAccount.
`ModifyVpnAttachmentAttributeRequest.Builder`	`regionId(String regionId)` The ID of the region in which the IPsec-VPN connection is established.
`ModifyVpnAttachmentAttributeRequest.Builder`	`remoteCaCert(String remoteCaCert)` The peer CA certificate when a ShangMi (SM) VPN gateway is used to create the IPsec-VPN connection.
`ModifyVpnAttachmentAttributeRequest.Builder`	`remoteSubnet(String remoteSubnet)` The CIDR block of the data center that communicates with the VPC.
`ModifyVpnAttachmentAttributeRequest.Builder`	`resourceOwnerAccount(String resourceOwnerAccount)` ResourceOwnerAccount.
`ModifyVpnAttachmentAttributeRequest.Builder`	`resourceOwnerId(Long resourceOwnerId)` ResourceOwnerId.
`ModifyVpnAttachmentAttributeRequest.Builder`	`vpnConnectionId(String vpnConnectionId)` The ID of the IPsec-VPN connection.

从类继承的方法 java.lang.Object
clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

- 方法详细资料
  - autoConfigRoute
```
public ModifyVpnAttachmentAttributeRequest.Builder autoConfigRoute(Boolean autoConfigRoute)
```
    Specifies whether to automatically configure routes. Valid values:
    * **true** * **false**
  - bgpConfig
```
public ModifyVpnAttachmentAttributeRequest.Builder bgpConfig(String bgpConfig)
```
    The Border Gateway Protocol (BGP) configuration:
    * **BgpConfig.EnableBgp**: specifies whether to enable BGP. Valid values: * **true** * **false** * **BgpConfig.LocalAsn**: the autonomous system number (ASN) on the Alibaba Cloud side. Valid values: **1** to **4294967295**. You can enter the ASN in two segments. Separate the first 16 bits of the ASN from the remaining 16 bits with a period (.). Enter the number in each segment in decimal format. For example, if you enter 123.456, the ASN is: 123 × 65536 + 456 = 8061384. * **BgpConfig.TunnelCidr:** the CIDR block of the IPsec tunnel. The CIDR block falls within 169.254.0.0/16. The subnet mask of the CIDR block must be 30 bits in length. * **LocalBgpIp:** the BGP IP address on the Alibaba Cloud side. This IP address must fall within the CIDR block of the IPsec tunnel. > - Before you configure BGP, we recommend that you learn how BGP dynamic routing works and the limits of using BGP dynamic routing. For more information, see [BGP dynamic routing ](~~170235~~). > - We recommend that you use a private ASN to establish a connection with Alibaba Cloud over BGP. Refer to the relevant documentation for the private ASN range.
  - clientToken
```
public ModifyVpnAttachmentAttributeRequest.Builder clientToken(String clientToken)
```
    The client token that is used to ensure the idempotence of the request.
    You can use the client to generate the token, but you must make sure that the token is unique among different requests. The token can contain only ASCII characters. > If you do not specify this parameter, the system automatically uses the value of **RequestId** as the value of **ClientToken**. The **request ID** may be different for each request.
  - customerGatewayId
```
public ModifyVpnAttachmentAttributeRequest.Builder customerGatewayId(String customerGatewayId)
```
    The customer gateway associated with the IPsec-VPN connection.
  - effectImmediately
```
public ModifyVpnAttachmentAttributeRequest.Builder effectImmediately(Boolean effectImmediately)
```
    Specifies whether to immediately start IPsec negotiations after the configuration takes effect. Valid values:
    * **true**: immediately starts IPsec negotiations after the configuration is complete. * **false**: starts IPsec negotiations when inbound traffic is detected.
  - enableDpd
```
public ModifyVpnAttachmentAttributeRequest.Builder enableDpd(Boolean enableDpd)
```
    Specifies whether to enable the dead peer detection (DPD) feature. Valid values:
    * **true**: enables the DPD feature. The initiator of the IPsec-VPN connection sends DPD packets to check the existence and availability of the peer. If no feedback is received from the peer within a specific period of time, the connection fails. Then, the ISAKMP SA, IPsec SA, and IPsec tunnel are deleted. * **false**: disables the DPD feature. The initiator of the IPsec-VPN connection does not send DPD packets.
  - enableNatTraversal
```
public ModifyVpnAttachmentAttributeRequest.Builder enableNatTraversal(Boolean enableNatTraversal)
```
    Specifies whether to enable NAT traversal. Valid values:
    * **true** After NAT traversal is enabled, the initiator does not check the UDP ports during IKE negotiations and can automatically discover NAT gateway devices along the IPsec tunnel. * **false**
  - healthCheckConfig
```
public ModifyVpnAttachmentAttributeRequest.Builder healthCheckConfig(String healthCheckConfig)
```
    The health check configurations:
    * **HealthCheckConfig.enable**: specifies whether to enable the health check feature. Valid values: * **true** * **false** * **HealthCheckConfig.dip**: the destination IP address that is used for health checks. Enter the IP address on the data center side that the VPC can communicate with through the IPsec-VPN connection. * **HealthCheckConfig.sip**: the source IP address that is used for health checks. Enter the IP address on the VPC side that the data center can communicate with through the IPsec-VPN connection. * **HealthCheckConfig.interval**: the interval between two consecutive health checks. Unit: seconds. * **HealthCheckConfig.retry:** the maximum number of health check retries. * **HealthCheckConfig.Policy**: specifies whether to withdraw advertised routes when health checks fail. Valid values: * **revoke_route** * **reserve_route**
  - ikeConfig
```
public ModifyVpnAttachmentAttributeRequest.Builder ikeConfig(String ikeConfig)
```
    The configuration of Phase 1 negotiations:
    * **IkeConfig.Psk**: The pre-shared key that is used for authentication between the VPN gateway and the data center. * The pre-shared key must be 1 to 100 characters in length and can contain letters, digits, and the following characters: ``~ ! ` @ # $ % ^ & * () _ - + = {} [] | ; : \" , . < > / ?`` * If you do not specify a pre-shared key, the system generates a random 16-character string as the pre-shared key. You can call the [DescribeVpnConnection](~~120374~~) operation to query the pre-shared key that is generated by the system. >The pre-shared key of the IPsec-VPN connection must be the same as the authentication key of the data center. Otherwise, you cannot establish a connection between the data center and the VPN gateway. * **IkeConfig.IkeVersion**: the Internet Key Exchange (IKE) version. Valid values: **ikev1** and **ikev2**. * **IkeConfig.IkeMode**: the negotiation mode. Valid values: **main** and **aggressive**. * **IkeConfig.IkeEncAlg**: the encryption algorithm that is used in Phase 1 negotiations. Valid values: **aes**, **aes192**, **aes256**, **des**, and **3des**. * **IkeConfig.IkeAuthAlg**: the authentication algorithm that is used in Phase 1 negotiations. Valid values: **md5**, **sha1**, **sha256**, **sha384**, and **sha512**. * **IkeConfig.IkePfs**: the Diffie-Hellman (DH) key exchange algorithm that is used in Phase 1 negotiations. Valid values: **group1**, **group2**, **group5**, and **group14**. * **IkeConfig.IkeLifetime**: the security association (SA) lifetime determined by Phase 1 negotiations. Unit: seconds. Valid values: **0** to **86400**. * **IkeConfig.LocalIdIPsec**: the identifier of the IPsec-VPN connection on the Alibaba Cloud side. The identifier can be up to 100 characters in length. * **IkeConfig.RemoteId**: the identifier of the IPsec-VPN connection on the data center side. The identifier can be up to 100 characters in length.
  - ipsecConfig
```
public ModifyVpnAttachmentAttributeRequest.Builder ipsecConfig(String ipsecConfig)
```
    The configuration of Phase 2 negotiations:
    * **IpsecConfig.IpsecEncAlg:** the encryption algorithm that is used in Phase 2 negotiations. Valid values: **aes**, **aes192**, **aes256**, **des**, and **3des**. * **IpsecConfig. IpsecAuthAlg:** the authentication algorithm that is used in Phase 2 negotiations. Valid values: **md5**, **sha1**, **sha256**, **sha384**, and **sha512**. * **IpsecConfig. IpsecPfs:** the DH key exchange algorithm that is used in Phase 2 negotiations. Valid values: **disabled**, **group1**, **group2**, **group5**, and **group14**. * **IpsecConfig. IpsecLifetime**: the SA lifetime determined by Phase 2 negotiations. Unit: seconds. Valid values: **0** to **86400**.
  - localSubnet
```
public ModifyVpnAttachmentAttributeRequest.Builder localSubnet(String localSubnet)
```
    The CIDR block of the virtual private cloud (VPC) that communicates with the data center. The CIDR block is used in Phase 2 negotiations.
    Separate multiple CIDR blocks with commas (,). Example: 192.168.1.0/24,192.168.2.0/24. The following routing modes are supported: * If you set **LocalSubnet** and **RemoteSubnet** to 0.0.0.0/0, the routing mode of the IPsec-VPN connection is set to Destination Routing Mode. * If you set **LocalSubnet** and **RemoteSubnet** to specific CIDR blocks, the routing mode of the IPsec-VPN connection is set to Protected Data Flows.
  - name
```
public ModifyVpnAttachmentAttributeRequest.Builder name(String name)
```
    The name of the IPsec-VPN connection.
    The name must be 1 to 100 characters in length and cannot start with `http://` or `https://`.
  - networkType
```
public ModifyVpnAttachmentAttributeRequest.Builder networkType(String networkType)
```
    The network type of the IPsec-VPN connection. Valid values:
    * **public**: an encrypted connection over the Internet * **private**: an encrypted connection over private networks
  - ownerAccount
```
public ModifyVpnAttachmentAttributeRequest.Builder ownerAccount(String ownerAccount)
```
    OwnerAccount.
  - regionId
```
public ModifyVpnAttachmentAttributeRequest.Builder regionId(String regionId)
```
    The ID of the region in which the IPsec-VPN connection is established.
    You can call the [DescribeRegions](~~36063~~) operation to query the most recent region list.
  - remoteCaCert
```
public ModifyVpnAttachmentAttributeRequest.Builder remoteCaCert(String remoteCaCert)
```
    The peer CA certificate when a ShangMi (SM) VPN gateway is used to create the IPsec-VPN connection.
  - remoteSubnet
```
public ModifyVpnAttachmentAttributeRequest.Builder remoteSubnet(String remoteSubnet)
```
    The CIDR block of the data center that communicates with the VPC. This CIDR block is used in Phase 2 negotiations.
    Separate multiple CIDR blocks with commas (,). Example: 192.168.3.0/24,192.168.4.0/24. The following routing modes are supported: * If you set **LocalSubnet** and **RemoteSubnet** to 0.0.0.0/0, the routing mode of the IPsec-VPN connection is set to Destination Routing Mode. * If you set **LocalSubnet** and **RemoteSubnet** to specific CIDR blocks, the routing mode of the IPsec-VPN connection is set to Protected Data Flows.
  - resourceOwnerAccount
```
public ModifyVpnAttachmentAttributeRequest.Builder resourceOwnerAccount(String resourceOwnerAccount)
```
    ResourceOwnerAccount.
  - resourceOwnerId
```
public ModifyVpnAttachmentAttributeRequest.Builder resourceOwnerId(Long resourceOwnerId)
```
    ResourceOwnerId.
  - vpnConnectionId
```
public ModifyVpnAttachmentAttributeRequest.Builder vpnConnectionId(String vpnConnectionId)
```
    The ID of the IPsec-VPN connection.
  - build
```
public ModifyVpnAttachmentAttributeRequest build()
```

类 ModifyVpnAttachmentAttributeRequest.Builder

方法概要

从类继承的方法 java.lang.Object

方法详细资料

autoConfigRoute

bgpConfig

clientToken

customerGatewayId

effectImmediately

enableDpd

enableNatTraversal

healthCheckConfig

ikeConfig

ipsecConfig

localSubnet

name

networkType

ownerAccount

regionId

remoteCaCert

remoteSubnet

resourceOwnerAccount

resourceOwnerId

vpnConnectionId

build